CONTINUOUS EXTRUSION/SOFT-HARD-SOFT

High-capacity synchronized systems accommodate a variety of rigid and flexible product applications
Application includes dual durometer parts
Primarily used in air induction

CO-INJECTION

Enhanced mechanical performance fiber-reinforced core and unreinforced skin
Reduced sink marks using foaming agents, which in turn may lead to reduction of clamping force
Inexpensive core material such as regrind can be used

HYBRID/COMPRESSION MOLDING

Light-weighting applications
Compression with co-injection molding
Polyurethane & natural fiber composite board
Primarily used for Interior systems

WRAPPING

Garnish trim, applique, armrests, quarter panels, and load floors
Covering-carpet / fabric / vinyl
Glue-less wrapping to Thermoplastic substrate
Heat activated glue wrapping to P substrate
No fasteners or welding

COMPLEX ASSEMBLY

Consoles, door panels, etc.
State-of-the-art system
Proprietary secondary and finishing fixture technology to ship fully assembled product systems
Proprietary and custom adapted robotics technologies

INJECTION MOLDING

One of the largest automotive injection molder in North America
75T-3300T press size

BLOW MOLDING

One of the largest automotive blow molder in North America
In-house machine & mold design/build capabilities
1lb – 40lb shot size

2-SHOT MOLDING/OVER-MOLDING

Cost-savings; tooling, parts/components, and secondary operations
Design flexibility
Two or more colors and/or materials can be injected simultaneously or sequentially

IR WELDING

Ability to weld complex 2D & 3D geometries1
Fast temperature ramp-up
Strong welds
Ability to join variety of materials
Low electrical consumption and overall maintenance

3D FLASHLESS BLOW MOLDING

Cost-savings in part scrap/regrind
Performance enhancements
Design flexibility
Primarily used in air induction

PAINTING

Operates fully integrated, robotic paint lines
Utilize waterborne interior 1K and 2K paint systems

Henri Tsang

President Asia Pacific

Henri Tsang was appointed TI Fluid Systems’ President of Asia Pacific in January 2024. He brings more than 30 years of automotive industry experience, previously serving as Managing Director of Fuel Tanks and Delivery Systems in the region. Henri’s distinguished career includes senior leadership positions at Valeo, Plastic Omnium, Magna, and CAIP Automotive, with expertise spanning sales, business development, and operational management.

Steve Vercauteren

President EMEA

Steve Vercauteren became President EMEA of TI Fluid Systems in January 2024 after serving as Executive Vice President of the Fuel Tank & Delivery Systems Division. With more than 30 years of extensive global automotive industry experience, Steve has held multiple roles in production, commercial, and executive leadership within the company, successfully driving strategic initiatives and operational excellence.

Julian Plenchette

President Americas

Julian Plenchette serves as President Americas, bringing over 20 years of automotive leadership experience. He previously held senior roles at major tier-one suppliers including ZF/Wabco, LS Automotive, and Valeo. Prior to joining TI Fluid Systems in 2024, Julian was Managing Director and Vice President of Aptiv’s Active Safety and User Experience Business Unit in North America, overseeing strategic growth and technological advancements.

Johannes Helmich

Chief Technology Officer
Johannes Helmich serves as Chief Technology Officer, bringing more than 27 years of global engineering expertise focused on automotive innovation and electric vehicle advancements. Previously CTO of TI Fluid Systems, Johannes has held senior management roles at prominent Tier One suppliers such as Magna, Brose, Bosch, and Valeo. He will continue to accelerate TI Automotive’s product development and technological capabilities.

Omar Montasir

Chief Commercial Officer

Omar Montasir has extensive experience in commercial leadership, sales strategy, and project management. Before joining ABC Technologies, Omar served as Vice President of Sales and Project Management at Robert Bosch. His expertise encompasses global sales growth, customer relationship management, and strategic commercial initiatives within the automotive industry.

Janis Acosta

Chief Legal Officer

Janis Acosta joined TI Fluid Systems as Chief Legal Officer & Company Secretary in August 2023, bringing more than 20 years of international legal leadership in the automotive sector. Janis previously held senior roles at International Automotive Components (IAC) Group and Lear Corporation, specializing in mergers and acquisitions, corporate governance, regulatory compliance, and international commercial transactions. Her extensive global experience strengthens the company's legal and compliance frameworks.

Mark Decker

Chief Human Resources Officer

Mark Decker has more than three decades of human resources leadership within global automotive companies. Before joining ABC Technologies, he was CHRO at Joyson Safety Systems, following similar senior roles at Key Safety Systems, Nexteer Automotive, Fisker Automotive, and Meridian Automotive. Mark began his career at Ford Motor Company and Visteon Corporation, holding various operational and corporate HR roles across the U.S. and internationally, including three years in Yokohama, Japan.

John Loehr

Chief Transformation & Strategy Officer

John Loehr brings more than 30 years of strategic consulting and operational experience in automotive, industrial, and technology sectors. Prior to joining ABC Technologies, John was a Partner at global firms including Booz & Company, McKinsey & Company, and AlixPartners. His extensive expertise spans strategy, M&A, and operational transformation, with notable contributions to electric vehicle market strategies and supplier performance improvement across numerous automotive segments.

Alexander De Bock

Chief Financial Officer

Alexander De Bock was appointed Chief Financial Officer and Executive Director of TI Fluid Systems in April 2023. With 16 years of automotive financial leadership, Alexander previously served as CFO and Senior Vice President for ZF Friedrichshafen’s Commercial Vehicle division and CFO at WABCO Holdings. He began his career in audit assurance at Arthur Andersen (now Deloitte).

Terry Campbell

President & Chief Executive Officer

Terry Campbell has more than 25 years of global automotive leadership, renowned for driving operational excellence, innovation, and customer-centric solutions. Terry served as CEO and, previously, Chief Operations Officer at ABC Technologies. His extensive experience also includes senior roles at The Woodbridge Group as COO and at Johnson Controls Automotive Experience Group as Vice President & General Manager, responsible for the Americas & Asia Pacific. He also held various senior management positions at Magna International.